PENTENS T-200 PRO FIBER
Ultimate Elastic Acrylic Waterproofing Coating
PENTENS T-200 PRO FIBER is a high quality one component with integral fiber reinforcement elastomeric waterproofing coating and styrene-acrylic copolymer waterproofing membrane. It cures to form a durable, weather resistant, seamless, UV stable waterproofing coating for exposed and internal area.
ADVANTAGES
USES
APPLICATION
Dilute 1 portion of PENTENS T-007 permeable primer with 3 portions of clean water and then plaster directly to the surface to be waterproofed, in order to improved the bonding.
PENTENS T-200 PRO FIBER is suggested to apply 2 coats. Apply the first coat of PENTENS T-200 PRO FIBER on the application surface. Leave to cure for approximately 8 hours before applying second coat. PENTENS T-200 PRO FIBER can be installed with conventional airless spray equipment, brush or roller.
SAFETY
PENTENS T-200 PRO FIBER is non-toxic. For personal precautions, applicators are recommended to wear gloves and goggles when handling PENTENS T-200 PRO FIBER. In case contact with eyes, flush immediately with clean water and seek medical assistance if symptoms persist.
Ultimate Elastic Acrylic Waterproofing Coating
PENTENS T-200 PRO FIBER is a high quality one component with integral fiber reinforcement elastomeric waterproofing coating and styrene-acrylic copolymer waterproofing membrane. It cures to form a durable, weather resistant, seamless, UV stable waterproofing coating for exposed and internal area.
ADVANTAGES
- Resistant to cracking.
- High solar reflectance.
- Weather resistant.
- High elasticity.
- Able to absorb expansion and shrinkage movement without cracking.
- Environmentally Friendly. Easy application.
- Seamless.
- Adheres well over aged, galvanized and metal roofs, wood, asphalt or aluminum coatings, polystyrene foam insulation, polyester plastic panels, precast flat concrete and barrel cement tiles and many roofing materials.
- Non-toxic.
USES
PENTENS T-200 PRO FIBER which is one-part elastomeric with integral fiber reinforcement elastomeric waterproofing coating designed as exposed waterproofing coating on:
- Asbestos roof
- Toilet
- Balcony
- Metal or Zinc roofs
- RC gutters Floor slabs
- Concrete decks/roof
- External wall
- Flat roof
- Concrete structures
APPLICATION
Dilute 1 portion of PENTENS T-007 permeable primer with 3 portions of clean water and then plaster directly to the surface to be waterproofed, in order to improved the bonding.
PENTENS T-200 PRO FIBER is suggested to apply 2 coats. Apply the first coat of PENTENS T-200 PRO FIBER on the application surface. Leave to cure for approximately 8 hours before applying second coat. PENTENS T-200 PRO FIBER can be installed with conventional airless spray equipment, brush or roller.
SAFETY
PENTENS T-200 PRO FIBER is non-toxic. For personal precautions, applicators are recommended to wear gloves and goggles when handling PENTENS T-200 PRO FIBER. In case contact with eyes, flush immediately with clean water and seek medical assistance if symptoms persist.
Inquiry - PENTENS T-200 PRO FIBER
